PD 6662:2017 | How to set up intrusion alarm confirmation in the Ajax security system

This video will explain: PD 6662:2017 | How to set up intrusion alarm confirmation in the Ajax security system

According to security standards included in PD 6662:2017, the security system should transmit a separate alarm confirmation event to a monitoring station if multiple specific devices have been triggered within a set time. This video shows how to configure this feature in the Ajax security system.

List of devices supporting alarm confirmation:

・CombiProtect

・GlassProtect

・DoorProtect / DoorProtect Plus

・MotionCam

・MotionProtect / MotionProtect Plus

・MotionProtect Curtain

・Transmitter (accelerometer alarms)

・MultiTransmitter and connected wired devices

・StreetSiren / StreetSiren DoubleDeck (tamper and accelerometer alarms)

・HomeSiren (tamper alarms)

・KeyPad (tamper alarms)

All subsequently manufactured devices that comply with PD 6662:2017 will be marked with a sticker on the body and packaging.

You can also assign the following devices to confirm an alarm (please note that the devices below cannot be involved in alarm confirmation if you are configuring the system to comply with PD 6662):

・MotionProtect Outdoor

・SpaceControl panic button

・KeyPad panic button

・Button in Panic mode

・Wired detectors connected via DoorProtect, DoorProtect Plus and GlassProtect

Versions of Ajax apps to configure the system to comply with PD 6662:2017:

・Ajax PRO for iOS, no lower than 1.9

・Ajax PRO for Android, no lower than 1.9

・Ajax PRO Desktop, no lower than 2.7