37

Ajax

Last Update 9 months ago

Unique tool for upgrading wired security systems: EOLR’s resistance measuring in MultiTransmitter Chime: How to set up notifications about door opening when the system is disarmed How to install the 12V or 6V power supply unit into an Ajax control panel/range extender PD 6662:2017 | How to set up two-stage arming in the Ajax security system PD 6662:2017 | How to set up intrusion alarm confirmation in the Ajax security system

PD 6662:2017 | How to set up the restoration after alarm in the Ajax security system

Ajax

Admin

Last Update 10 months ago

This video will explain: PD 6662:2017 | How to set up the restoration after alarm in the Ajax security system


According to security standards included in PD 6662:2017, the security system's alarms should be inspected by installers or other security company representatives. The feature prevents Ajax from arming after previously being triggered. To arm the system, the incident must be checked and the system restored by an authorized user (PRO or administrator). This video shows how to configure this feature in the Ajax security system.


Versions of Ajax apps to configure the system to comply with PD 6662:2017:


・Ajax PRO for iOS, no lower than 1.9

・Ajax PRO for Android, no lower than 1.9

・Ajax PRO Desktop, no lower than 2.7


All subsequently manufactured devices that comply with PD 6662:2017 will be marked with a sticker on the body and packaging.